PERRIN PERFORMANCE TURBO INLET - 2015-2021 WRX, 14-18 FORESTER

Important note for 2017-2021 WRX models:

This turbo inlet is not compatible with Canadian spec 17-21 WRX models. The Canadian spec WRX models have a cast aluminum turbo inlet from factory which has coolant passages. This Perrin unit does not have coolant passages therefor is not directly compatible. 

Overview

The PERRIN 3″ Turbo Inlet Hose for the 2015-2021 WRX will increase airflow to the engine which increases horsepower while adding a touch of color and style to your engine bay.

NO TUNING REQUIRED!

Why You Need This

The plastic intake manifold flexes under normal driving conditions. Over time, the flange will compress and deform causing vacuum leaks at the turbo. This leads to dangerous engine conditions and check engine lights. The Perrin Turbo Inlet Hose for 2015-2018 Subaru WRX remedies this by using a CNC billet flange (and OEM O-ring) and a large silicone hose to connect the turbo to your intake system. This eliminates the potential for vacuum leaks while increasing performance.

Proper Inlet-To-Turbo Alignment

The OEM Subaru turbo inlet hose is smaller than the inlet of the turbo, causing an unnecessary restriction  for the turbo’s intake. The CNC machined flange of the Perrin turbo inlet hose has a built-in velocity stack that perfectly matches the turbo’s inlet, allowing for smoother and unrestricted air flow at the turbo.

3″ Diameter For More Flow

The Perrin turbo inlet hose has a 3.0″ internal diameter compared to  2.6″ found in the OEM part. This allows for a greater amount of air to smoothly enter your engine with virtually no restriction. This larger diameter will easily support all bolt on modifications and increased boost levels.

Smoother Air Flow

The Perrin turbo inlet hose is perfectly smooth on the inside. The OEM turbo inlet has sharp bends, corrugated ribbing, and strange pockets, all of which disturb air flow. The Perrin turbo inlet hose is much smoother, with more gradual bends toward the turbo making for less restriction leading to increased horsepower and improved acceleration.

Wire Reinforcement

The Perrin turbo inlet hose is reinforced with a stainless steel support wire that is embedded within the silicone layers. The support adds rigidity to the hose and prevents collapses when used with restrictive filter elements and high horsepower setups.

Form & Function

Not only does the Perrin turbo inlet hose provide superior airflow from your intake for increased power and throttle response, it will look great doing so. The clean and smooth look of the hose will help to clean up your engine bay.

IMPORTANT NOTE : THIS IS ONLY COMPATIBLE WITH MODELS THAT CAME WITH THE PLASTIC TURBO INLET FROM FACTORY.  NOT COMPATIBLE WITH CAST TURBO INLET WITH COOLANT PASSAGES. PLEASE CHECK BEFORE ORDERING.